Products at a Glance
INLINE DRIP LINE
 

SEW with it’s continue research and development is first to develop indigenous Inline drip line machine in India. Drip irrigation is an efficient method of applying water and nutrition to crop. Inline drip line irrigation is most effective in fruits, vegetables and flowers.

Benefits of Drip Irrigation

Reduction in water consumption.
Constant flow of water to root level
Low operating cost
Low probability of weeds & disease.

 

Standard Line equipments

Extruder with control panel
Inserting Device
Crosshead
Perforating device
Semi-automatic coiling machine
Haul-off
Vacuum calibrating tank with cooling tank

Technical Data of Inline drip machine

Model SEW 50 IDM SEW 65 IDM
Screw Dia 50 mm 65 mm
LD Ratio 30:1 30:1
Main Drive 18.75 KW 22.50 KW
Gear Box Helical Helical
Output Max. 60 kg/hour Max. 120 kg/hour
Pipe Diameter in mm Min 12mm / Max 20 mm Min 12mm / Max 20 mm
Wall Thickness in mm Min 0.80mm / Max 1.30 mm Min 0.80mm / Max 1.30 mm
Raw material LLDPE,LDPE, HDPE LLDPE,LDPE, HDPE
Line Speed Max. 30m/min Max. 60m/min
Dripper Inserting Upto 90 dispenser/min Upto 180 dispenser/min
Perforating By Electric Motor By Electric Motor
Connected Load 38 KW 48 KW
Air pressure
 8 Kg/cm2 14 Kg/cm2
Space requirement

L16 /W4.5 / H4.5 mtr

L22 / W4.5/ H4.5 mtr

 
EXTRUDER
Single screw extruder especially suitable for the extrusion of LLDPE/ HDPE and other type of thermoplastic material. Screw barrel having designed with latest technology driven by AC frequency resulting into maximum output and low power consumption. Screw barrel is duly nitride, hardened and provided with water cooling arrangement and spider based cross head.

INSERTING DEVICE
The loading and dripper orienting unit is composed of a hopper with a feeder which brings the drippers up into a rotating and centrifugal bowl. There dripper are sorted, positioned and fed at a very high speed into the line. SEW has developed an insertion unit combined with a special extrusions head to improve the quality of the final irrigation pipes. The distance between the dripper can be self programmed as per the application.

VACCUM TANK
The vacuum tank is made of a structure of steel profiles which are mounted a vacuum tank in stainless steel. A transparent lid on the vacuum tank allows a steady control of the pipe. The cooling tank is made of two tanks of three meter each of a total length of six meter each element comprises in which pipes are cooled by emulsion at the end of the cooling tank.

WINDER /SEMI AUTOMATIC WINDER
The machine will wind with a speed up to 60 m/min plus 30% recovery speed the operator after having hooked the coming drip line into the free reel, will recuperate the uncoiled pipe and wind it, accelerating the speed of the machine until the complete recovery of the pipe. He will then bind the previous formed coil.

PERFORATING DEVICE
The new advanced perforating device has been designed for a very reliable production. It can perforate up to 180 dripper per minute.


HAUL OFF
Driven by an AC motor at a constant and the caterpillar are fitted on four aluminum pullies

We offer extensive range of optional attachment & equipments to fulfill your Inline Drip Machine

Dryer
Co-extrusion system
Hot Printer
Offset ink printer
Strappex machine
Flow test machine


TOP